Accessibility compliance: Key dimensions for Singapore restrooms (checklist)

Accessibility compliance: Key dimensions for Singapore restrooms (checklist)

Check our other pages :

Frequently Asked Questions

Restroom entrances must have a minimum clear width of 900mm and level access. Doors should be easy to open and close, with lever-type handles preferred. Signage with tactile and Braille information is also essential for easy identification.
Accessible toilets must have grab bars on both sides of the toilet bowl. These grab bars should be between 700mm and 800mm above the floor, 30mm to 40mm in diameter, and have a slip-resistant surface. A vertical grab bar near the entrance can also assist users.
An accessible toilet stall should have minimum dimensions of 1700mm wide and 2200mm deep. This allows enough space for wheelchair maneuvering. The toilet seat height should be 400mm to 450mm from the floor.
A wall-mounted wash basin with clear knee space underneath is ideal. The top of the basin should be no more than 800mm from the floor. Lever-operated taps or sensor taps are recommended for ease of use.
Mirrors should be positioned with the bottom edge no more than 1000mm from the floor, allowing visibility for wheelchair users. Tilting mirrors can also be installed to accommodate different heights.
An emergency call button should be installed within reach of the toilet and the floor, connected to a central monitoring system. Clear instructions on how to use the emergency system should also be provided.